Search

To develop special insulating paper is of great significance to promote the service life of transformers. Using molecular simulation to guide the development of special insulating paper can greatly reduce the trial-and-error rate and waste of resources in traditional experiments. The effect of different types of polysilsesquioxane (POSS) on cellulose insulating paper was investigated by using molecular simulation. This paper investigated the thermal stability and mechanical properties and electrical characteristics of caged POSS, semi-caged POSS, and ladder-like POSS doped cellulose insulating paper. The results show that POSS with all types can enhance the performance of cellulose insulating paper, and ladder-like POSS possess the best modification effect. The glass transition temperature was increased by 58 K, and the bulk modulus, shear modulus, and elastic modulus of cellulose insulating paper doped with ladder-like POSS can improve up to 27.07%, 45.67%, and 41.28%, respectively. Meanwhile, the dielectric properties of ladder-like POSS modified insulating paper are also significantly improved. The findings of this paper propose a method for the preparation of ladder-like POSS modified insulating paper, which provides theoretical guidance for the experimental preparation of special insulating paper. [ABSTRACT FROM AUTHOR]

The cellulose fibers that form washi are longer than those of regular paper made from wood pulp. Hence, the mechanical properties of washi can be higher than those of conventional paper. This study evaluated the magnetic, magnetostrictive, and tensile properties of negative magnetostrictive cobalt ferrite (CoFe2O4) particle dispersed handmade washi (washi−CoFe2O4). The CoFe2O4 additives magnetized the washi, which displayed negative magnetostriction with the fiber direction perpendicular to the magnetic field and in the parallel fiber direction. Concerning the mechanical properties, the washi−CoFe2O4 displayed an elongation of up to 77% after yielding. [ABSTRACT FROM AUTHOR]

We report for the first time MoS2/CNT hybrid nanostructures for memristor applications on flexible and bio-degradable cellulose paper. In our approach, we varied two different weight percentages (10% and 20%) of CNT's in MoS2 to improve the MoS2 conductivity and investigate the memristor device characteristics. The device with 10% CNT shows a low V SET voltage of 2.5 V, which is comparatively small for planar devices geometries. The device exhibits a long data retention time and cyclic current–voltage stability of ∼104 s and 102 cycles, making it a potential candidate in flexible painted electronics. Along with good electrical performance, it also demonstrates a high mechanical stability for 1000 bending cycles. The conduction mechanism in the MoS2-CNT hybrid structure is corroborated by percolation and defect-induced filament formation. Additionally, the device displays synaptic plasticity performance, simulating potentiation and depression processes. Furthermore, such flexible and biodegradable cellulose-based paper electronics may pave the way to address the environmental pollution caused by electronic waste in the near future. [ABSTRACT FROM AUTHOR]

Herein, a self-powered lactate biosensor (SPLBs) was assembled to detect lactate in sweat based on flexible textile matrix enzymatic electrodes. A porous three-dimensional electrode with high flexibility and electrical conductivity was obtained by decorating composites of reduced graphene oxide and carboxylate multiwalled carbon nanotubes onto a cellulose fabric substrate. The excellent enzyme embedding method using a gel electrolyte showed a Michaelis–Menten constant of 1.46 mM, indicating the high enzymatic activity of lactate dehydrogenase. Moreover, the assembled (SPLBs) displayed a sensitivity of 3.16 µW mM−1 cm−2 with a linear range of 0–10 mM and a detection limit of 9.49 µM. Additionally, the biosensor has good tensile flexural stability, selectivity, and long-term stability. When integrated into clothing, the (SPLBs) recovered 91.5–102.3% of lactate from real sweat, with a relative standard deviation of less than 4.16%. This biosensor is promising for sensing lactate in human sweat. [ABSTRACT FROM AUTHOR]

The development of the Internet of Things has increased the anticipation for wearable smart devices in personalized healthcare. Carbon aerogel films, characterized by multifunctional and lightweight porous properties, are emerging as promising components for lightweight smart devices. In this study, we adopt a straightforward, cost-effective approach to fabricate carbon aerogels using cellulose nanofibers (CNF) and graphene (GO) co-stabilized Pickering emulsion, followed by vacuum filtration, freeze-drying, and carbonization treatment. The carbonization process involves the pyrolysis of paraffin wax and the reduction of graphene oxide, resulting in a uniquely porous structure, low density, and remarkable properties related to Joule heating, photothermal conversion, and conductivity sensitivity across a wide range of stresses. Incorporating CRP-30 into a piezoresistive sensor enables real-time monitoring of subtle human activities such as carotid pulse beats, swallowing, and facial expressions. This multifunctional carbon aerogel film holds great promise in the domains of wearable personal thermal management and personal health monitoring. [ABSTRACT FROM AUTHOR]

Controlled development of novel materials fosters innovation in the electrical sector. The hybrid materials based on magnetic nanocellulose are intriguing since they have many uses in electronics, catalysis, medicine, and ecology. The study investigated the structure and morphology of hybrid nanomaterials made from nanocellulose and cobalt ferrite. The nanocellulose was prepared by TEMPO-oxidation and the cobalt ferrite was prepared by sol-gel auto-combustion method. Using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) techniques, it was determined how nanocellulose loading affected the crystal structure of the synthesized composite. To ascertain the variation in the component concentrations, scanning electron microscope (SEM) and energy-dispersive X-ray analysis (EDAX) are used. Composite with a higher concentration of nanocellulose fibers (NCF) show lesser particle size, and this may account for the smaller size of nanocellulose fibers, and attachment of nanocellulose nanofibers over the surface of porous cobalt ferrite (CF) found in SEM images. [ABSTRACT FROM AUTHOR]

[Display omitted] The flexible and self-healing supercapacitors (SCs) are considered to be promising smart energy storage devices. Nevertheless, the SCs integrated with flexibility, lightweight, pattern editability, self-healing capabilities and desirable electrochemical properties remain a challenge. Herein, an all-in-one self-healing SC fabricated with the free-standing hybrid film (TCMP) composed of the 2,2,6,6-tetramethylpiperidin-1-yloxy-oxidized cellulose nanofibers (TOCNs) carried carbon nanotubes (CNTs), manganese dioxide (MnO 2) and polyaniline (PANI) as the electrode, polyvinyl alcohol/sulfuric acid (PVA/H 2 SO 4) gel as the electrolyte and dynamically cross-linked cellulose nanofibers/PVA/sodium tetraborate decahydrate (CNF/PB) hydrogel as the self-healing electrode matrix is developed. The TCMP film electrodes are fabricated through a facile in-situ polymerization of MnO 2 and PANI in TOCNs-dispersed CNTs composite networks, exhibiting lightweight, high electrical conductivity, flexibility, pattern editability and excellent electrochemical properties. Benefited from the hierarchically porous structure and high mechanical properties of TOCNs, excellent electrical conductivity of CNTs and the desirable synergistic effect of pseudocapacitance induced by MnO 2 and PANI, the assembled SC with an interdigital structure demonstrated a high areal capacitance of 1108 mF cm−2 at 2 mA cm−2, large areal energy density of 153.7 μWh cm−2 at 1101.7 μW cm−2. A satisfactory bending cycle performance (capacitance retention up to 95 % after 200 bending deformations) and self-healing characteristics (∼90 % capacitance retention after 10 cut/repair cycles) are demonstrated for the TCMP-based symmetric SC, delivering a feasible strategy for electrochemical energy storage devices with excellent performance, designable patterns and desirable safe lifespan. [ABSTRACT FROM AUTHOR]

[Display omitted] Recently, wearable electronic products and gadgets have developed quickly with the aim of catching up to or perhaps surpassing the ability of human skin to perceive information from the external world, such as pressure and strain. In this study, by first treating the cellulosic fiber (modal textile) substrate with (3-aminopropyl) triethoxysilane (APTES) and then covering it with conductive nanocomposites, a bionic corpuscle layer is produced. The sandwich structure of tactile corpuscle-inspired bionic (TCB) piezoresistive sensors created with the layer-by-layer (LBL) technology consists of a pressure-sensitive module (a bionic corpuscle), interdigital electrodes (a bionic sensory nerve), and a PU membrane (a bionic epidermis). The synergistic mechanism of hydrogen bond and coupling agent helps to improve the adhesive properties of conductive materials, and thus improve the pressure sensitive properties. The TCB sensor possesses favorable sensitivity (1.0005 kPa−1), a wide linear sensing range (1700 kPa), and a rapid response time (40 ms). The sensor is expected to be applied in a wide range of possible applications including human movement tracking, wearable detection system, and textile electronics. [ABSTRACT FROM AUTHOR]

It has attracted tremendous attention for replacing petroleum‐based carbon black or mineral fillers with renewable, biology‐based and low‐cost cellulose. However, the reinforcing effect of cellulose, especially at the microscale, is still a great challenge in the polymer industry. In this work, a feasible surface modification method for microcrystalline cellulose powder (MCC) in all solid states is proposed by using rubber accelerators N‐cyclohexyl benzothiazole‐2‐sulphenamidee (CBS) and 2,2′‐dibenzothiazoledisulfide (DM). These accelerators not only accelerate the sulfur crosslink of nitrile butadiene rubber (NBR), but also graft to rubber molecular chains and form hydrogen bonds with MCC, resulting in good interfacial interaction and good dispersion of MCC in the NBR matrix. As a consequence, the tensile strength and elongation at break of NBR/10MCC reach up to 20.12 MPa and 511%, respectively, which are the highest values of NBR/MCC or cellulose nanocrystals (CNCs) composites we can find in the world and are comparable to those of carbon black or mineral fillers. This provides a more effective and environmentally friendly way of using MCC or CNCs in the polymer industry. Highlights: Microcrystalline cellulose powder can reinforce NBR.Hydrogen bonds have been established between accelerators and MCC.The tensile strength of NBR/10MCC composite reaches 20 MPa.The reinforcing mechanism is ascribed to the immobilized rubber layer. [ABSTRACT FROM AUTHOR]

Cellulose nanofiber (CNF) is an environmentally friendly material with a high specific surface area, which is an ideal candidate for cathode catalysts in zinc–air batteries (ZABs). However, untreated CNF-based carbon materials suffer from low intrinsic activity and fewer micro-mesopores. Herein, we developed an N-doped porous carbon aerogel from CNF and graphite phase carbon nitride (g-C3N4) via hydrothermal pretreatment and the carbonization process. The CNF can serve as the skeleton of the aerogel that leads to an interconnected porous structure, while g-C3N4 guarantees the in situ N doping and the formation of more nanopores. Therefore, the as-prepared carbon aerogel exhibits excellent oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performances owing to the successful N doping with sufficient graphite-N and pyridine-N active sites (69.1%) and high specific surface areas (785.4 m2 g−1). The assembled ZABs with a carbon aerogel deliver a specific capacity of 790 mA h g−1 and an energy density of 945.6 W h kg−1 with a long-term stability over 100 h. This work opens a new avenue for the effective conversion of abundant biomass into bifunctional air cathodes for energy-related applications. [ABSTRACT FROM AUTHOR]

Bamboo cellulose fiber (BF)-reinforced epoxy (EP) composites were fabricated with BF subjected to plasma treatment using argon (Ar), oxygen (O2), and nitrogen (N2) gases. Optimal mechanical properties of the EP/BF composites were achieved with BFs subjected to 30 min of plasma treatment using Ar. This is because Ar gas improved the plasma electron density, surface polarity, and BF roughness. Flexural strength and flexural modulus increased with O2 plasma treatment. Scanning electron microscopy images showed that the etching of the fiber surface with Ar gas improved interfacial adhesion. The water contact angle and surface tension of the EP/BF composite improved after 10 min of Ar treatment, owing to the compatibility between the BFs and the EP matrix. The Fourier transform infrared spectroscopy results confirmed a reduction in lignin after treatment and the formation of new peaks at 1736 cm−1, which indicated a reaction between epoxy groups of the EP and carbon in the BF backbone. This reaction improved the compatibility, mechanical properties, and water resistance of the composites. [ABSTRACT FROM AUTHOR]

Short fiber-reinforced thermoplastic polymers (SFRTPs) are commonly used in various molding methods due to their high specific elasticity and strength. To evaluate the interfacial strength, several determination methods have been proposed, including the interfacial shear strength (IFSS). In previous research, an IFSS evaluation method based on the short beam shear method was proposed. However, this method is only applicable to micrometer-sized fibers with high stiffness levels that are not easily bent. When utilizing cellulose fiber, the interfacial shear strength (IFSS) results frequently exhibit significant deviations. To tackle this issue, we suggest an enhanced experimental technique that employs beam-shaped specimens with welding points based on the short beam shear test. Furthermore, we conducted a three-dimensional analysis of the original method to determine the fiber orientation angle and IFSS. The outcomes were compared with previously reported determinations. The IFSS achieved through the novel method proposed in this paper exhibits high precision and reliability, rendering it suitable for use with soft and flexible fibers. [ABSTRACT FROM AUTHOR]

L-poly(lactic acid), poly(3-hydroxybutyrate), and poly-hydroxybutyrate-co-hydroxyvalerate are biodegradable polymers that can be obtained from renewable biomass sources. The aim of this study was to develop three types of environmentally friendly film biocomposites of altered microstructure by combining each of the above-mentioned polymers with cellulose nanocrystal fillers and further processing the resulting materials via space-confined solvent vapor annealing. Cellulose was previously obtained from renewable biomass and further converted to cellulose nanocrystals by hydrolysis with the lactic acid. The solutions of biodegradable polymers were spin-coated onto solid substrates before and after the addition of cellulose nanocrystals. The obtained thin film composites were further processed via space-confined solvent vapor annealing to eventually favor their crystallization and, thus, to alter the final microstructure. Indeed, atomic force microscopy studies have revealed that the presence of cellulose nanocrystals within a biodegradable polymer matrix promoted the formation of large crystalline structures exhibiting fractal-, spherulitic- or needle-like morphologies. [ABSTRACT FROM AUTHOR]

Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes that oxidatively degrade various polysaccharides, such as cellulose. Despite extensive research on this class of enzymes, the role played by their C-terminal regions predicted to be intrinsically disordered (dCTR) has been overlooked. Here, we investigated the function of the dCTR of an LPMO, called CoAA9A, up-regulated during plant infection by Colletotrichum orbiculare, the causative agent of anthracnose. After recombinant production of the full-length protein, we found that the dCTR mediates CoAA9A dimerization in vitro, via a disulfide bridge, a hitherto-never-reported property that positively affects both binding and activity on cellulose. Using SAXS experiments, we show that the homodimer is in an extended conformation. In vivo, we demonstrate that gene deletion impairs formation of the infection-specialized cell called appressorium and delays penetration of the plant. Using immunochemistry, we show that the protein is a dimer not only in vitro but also in vivo when secreted by the appressorium. As these peculiar LPMOs are also found in other plant pathogens, our findings open up broad avenues for crop protection. [ABSTRACT FROM AUTHOR]

Highlights: A lamellar-structured fluorinated cellulose nanofiber aerogel film is prepared by filtration-induced delaminated gelation and ambient drying. The aerogel film demonstrates exceptional mechanical flexibility and resistance to complex deformations. The aerogel film displays low thermal conductivity, high visible-light transmittance and superior selective infrared emissivity, rendering it high solar-thermal regulatory cooling performance. The demand for highly porous yet transparent aerogels with mechanical flexibility and solar-thermal dual-regulation for energy-saving windows is significant but challenging. Herein, a delaminated aerogel film (DAF) is fabricated through filtration-induced delaminated gelation and ambient drying. The delaminated gelation process involves the assembly of fluorinated cellulose nanofiber (FCNF) at the solid–liquid interface between the filter and the filtrate during filtration, resulting in the formation of lamellar FCNF hydrogels with strong intra-plane and weak interlayer hydrogen bonding. By exchanging the solvents from water to hexane, the hydrogen bonding in the FCNF hydrogel is further enhanced, enabling the formation of the DAF with intra-layer mesopores upon ambient drying. The resulting aerogel film is lightweight and ultra-flexible, which possesses desirable properties of high visible-light transmittance (91.0%), low thermal conductivity (33 mW m−1 K−1), and high atmospheric-window emissivity (90.1%). Furthermore, the DAF exhibits reduced surface energy and exceptional hydrophobicity due to the presence of fluorine-containing groups, enhancing its durability and UV resistance. Consequently, the DAF has demonstrated its potential as solar-thermal regulatory cooling window materials capable of simultaneously providing indoor lighting, thermal insulation, and daytime radiative cooling under direct sunlight. Significantly, the enclosed space protected by the DAF exhibits a temperature reduction of 2.6 °C compared to that shielded by conventional architectural glass. [ABSTRACT FROM AUTHOR]

Cellulose is an abundant natural polymer and is thus promising for enforcing biobased plastics. A broader application of cellulose fibers as a filler in polymer composites is limited because of their hydrophilicity and hygroscopicity. The recent scientific literature on plasma methods for the hydrophobization of cellulose materials is reviewed and critically evaluated. All authors focused on the application of plasmas sustained in fluorine or silicon-containing gases, particularly tetrafluoromethane, and hexamethyldisiloxane. The cellulose materials should be pre-treated with another plasma (typically oxygen) for better adhesion of the silicon-containing hydrophobic coating. In contrast, deposition of fluorine-containing coatings does not require pre-treatment, which is explained by mild etching of the cellulose upon treatment with F atoms and ions. The discrepancy between the results reported by different authors is explained by details in the gas phase and surface kinetics, including the heating of samples due to exothermic surface reactions, desorption of water vapor, competition between etching and deposition, the influence of plasma radiation, and formation of dusty plasma. Scientific and technological challenges are highlighted, and the directions for further research are provided. [ABSTRACT FROM AUTHOR]

Xanthan gum is commonly used in the pharmaceutical, cosmetic, and food industries. However, there have been no studies on utilizing this natural biopolymer as a foam material in the insulation and packaging sectors, which are large markets, or modeling it using an artificial neural network. In this study, foam material production was carried out in an oven using different ratios of cellulose fiber and xanthan gum in a 5% citric acid medium. As a result of the physical and mechanical experiments conducted, it was determined that xanthan gum had a greater impact on the properties of the foam material than cellulose. The densities of the produced foam materials ranged from 49.42 kg/m3 to 172.2 kg/m3. In addition, the compressive and flexural moduli were found to vary between 235.25 KPa and 1257.52 KPa and between 1939.76 KPa and 12,736.39 KPa, respectively. Five machine-learning-based methods (multiple linear regression, support vector machines, artificial neural networks, least squares methods, and generalized regression neural networks) were utilized to analyze the effects of the components used in the foam formulation. These models yielded accurate results without time, material, or cost losses, making the process more efficient. The models predicted the best results for density, compression modulus, and flexural modulus achieved in the experimental tests. The generalized regression neural network model yielded impressive results, with R2 values above 0.97, enabling the acquisition of more quantitative data with fewer experimental results. [ABSTRACT FROM AUTHOR]

Cellulose-based hierarchical porous beads exhibit significant application potential in adsorption and separation systems due to their degradation and biocompatibility. However, the current fabrications of cellulose beads show poor mechanical properties and a difficult-to-regulate hierarchical porous structure, reducing their lifespan of use and limiting their application in fine separation. Here, we reported the facile creep–drop method to prepare cellulose beads that enabled systemic regulation of the macro-size, micropore structures, and mechanical properties by optimizing injection nozzle diameter, the composition of the coagulation bath, the temperature of the coagulation bath, and cellulose concentration. Notably, during the molding process, the H2SO4-Na2SO4 composite solidification bath endowed cellulose beads with a dense shell layer and a loose core layer, which achieved the integration of mechanical properties and high porosity. The cellulose beads exhibited high porosity (93.38–96.18%) and high sphericity (86.78–94.44%) by modulating the shell thickness of the cellulose beads. In particular, the cellulose beads exhibited excellent mechanical properties with a high compressive strength of 544.24 kPa at a 5% cellulose concentration. It is expected that these cellulose beads with tunable microstructures can realize their potential for applications in the fields of wastewater treatment, chemical engineering, bioengineering, medicine, and pharmaceuticals. [ABSTRACT FROM AUTHOR]

The paper presents the new eco-friendly method of bleaching process of the cellulose fibre materials. Cellulose materials were bleached using hydrogen peroxide (both in aqueous solution, vapours, ozone and by the combined action of gaseous hydrogen peroxide and ozone. The method using hydrogen peroxide in aqueous solution presents the standard procedure and was used as the comparison technique. The bleaching processes using gaseous oxidants were carried out in a prototype device for dry, low-temperature treatment of fibrous materials with the use of oxidising agents in the gas phase. The influence of the innovative gas-phase bleaching method on the cotton samples' properties was analysed by Scanning Electron Microscopy (SEM), evaluation of the colour and whiteness, assessment of the polymerisation degree (DP), analysis of the mechanical properties and sorption capacity as well as microbiological assessment against colonies of Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The comparison of the obtained results led to the conclusion that the bleaching processes using gas-phase agents—vaporised hydrogen peroxide, ozone or their combination—are non-invasive. The applied bleaching processes resulted in a slightly lower whiteness parameters than standard bath bleaching. After the bleaching processes with ozone and vaporised hydrogen peroxide separately, the decrease in the DP and tensile strength was similar to that observed after the bleaching with aqueous H2O2. When both processes were used together, a higher reduction in DP and tensile strength was noticed. Both oxidising agents showed a strong biocidal effect against bacteria. Gas-phase bleaching procedures, due to the lower temperature (35 °C vs. 98 °C) and minimal water consumption, have economic and environmental advantages, which allows their use in semi-industrial applications. It has been shown that the treatment of cotton fabrics using ozone and hydrogen peroxide in the gas phase allows to simultaneously obtain the bleaching and disinfection effect. [ABSTRACT FROM AUTHOR]

Explore the intriguing world of natural fibers, where Syagrus Romanzoffiana (SR) fibers out as a viable alternative to synthetic and glass fibers in composite materials. Dive into the eco-friendly attraction of SR fibers, which are renowned for their natural degradation and ecologically favorable properties. This novel work investigates the performance characterization of 40 mm gauge-length (GL) SR fibers under quasi-static pressures using rigorous tensile testing. The mystery develops when 200 fibers are examined in seven different test groups, revealing the effect of test quantity (N) on tensile strength, Young's modulus, and fracture strain. Given the intrinsic diversity of natural fibers, the study applies strong statistical approaches such as least squares (LS) and maximum likelihood (ML) estimations, as well as two- and three-parameter Weibull distributions. Witness the thorough dispersion and probability analysis, which culminates in an enthralling one-factor analysis of variance (ANOVA) across the seven test groups (N = 30, 60, 90, 120, 150, 180 and 200) for each tensile strength characteristic. Join us on this scientific trip as we uncover the mysteries and promise of Syagrus Romanzoffiana fibers to shape the future of composite materials. [ABSTRACT FROM AUTHOR]

A tri-layer sandwiched composite nonwoven membrane, composed of two electrospun PVA/Melamine layers and one ZIF-67@cellulose acetate composite nonwoven layer, for high power lithium-ion batteries. [Display omitted] • High-power and high-safety lithium-ion batteries composite membrane was developed. • ZIF-67 filler deposited on cellulose acetate fibers (Z 67 @CA) by in situ growth method. • Sandwich structure developed with electrospun poly(vinyl alcohol)/melamine nonwoven membranes (Esp-PVAM). • The Esp-PVAM/15%Z 67 @CA/Esp-PVAM membrane exhibited good capacity retention of 90.34% (1C) for 100 cycles. • The Esp-PVAM/15%Z 67 @CA/Esp-PVAM membrane has a good dendrite suppression and thermo-resistant properties. Due to the poor thermal stability of conventional separators, lithium-ion batteries require a suitable separator to maintain system safety for long-term cycling performance. It must have high porosity, superior electrolyte uptake ability, and good ion-conducting properties even at high temperatures. In this work, we demonstrate a novel composite membrane based on sandwiching of zeolitic imidazole frameworks-67 decorated cellulose acetate nanofibers (ZIF-67@CA) with electrospun poly(vinyl alcohol)/melamine (denoted as PVAM) nonwoven membranes. The as-prepared sandwich-type membranes are called PVAM/x%ZIF-67@CA/PVAM. The middle layer of composite membranes is primarily filled with different weight percentages of ZIF-67 nanoparticles (x = 5, 15, and 25 wt%), which both reduces the non-uniform porous structure of CA and increases its thermal stability. Therefore, our sandwich-type PVAM/x%ZIF-67@CA/PVAM membrane exhibits a higher thermal shrinkage effect at 200 °C than the commercial polyethylene (PE) separator. Due to its high electrolyte uptake (646.8%) and porosity (85.2%), PVAM/15%ZIF-67@CA/PVAM membrane achieved high ionic conductivity of 1.46 × 10-3 S cm−1 at 70 °C, as compared to the commercial PE separator (ca. 6.01 × 10-4 S cm−1 at 70 °C). Besides, the cell with PVAM/15%ZIF-67@CA/PVAM membrane shows an excellent discharge capacity of about 167.5 mAh g−1after 100 cycles at a 1C rate with a capacity retention of 90.3%. The ZIF-67 fillers in our sandwich-type composite membrane strongly attract anions (PF 6 -) through Lewis' acid-base interaction, allowing uniform Li+ ion transport and suppressing Li dendrites. As a result, we found that the PVAM/15%ZIF-67@CA/PVAM composite nonwoven membrane is applicable to high-power, high-safety lithium-ion battery systems that can be used in electric vehicles (EVs). [ABSTRACT FROM AUTHOR]

Silicone-based elastomers (SEs) have been extensively applied in numerous cutting-edge areas, including flexible electronics, biomedicine, 5G smart devices, mechanics, optics, soft robotics, etc. However, traditional strategies for the synthesis of polymer elastomers, such as bulk polymerization, suspension polymerization, solution polymerization, and emulsion polymerization, are inevitably restricted by long-time usage, organic solvent additives, high energy consumption, and environmental pollution. Here, we propose a Joule heating chemistry method for ultrafast universal fabrication of SEs with configurable porous structures and tunable components (e.g., graphene, Ag, graphene oxide, TiO2, ZnO, Fe3O4, V2O5, MoS2, BN, g-C3N4, BaCO3, CuI, BaTiO3, polyvinylidene fluoride, cellulose, styrene-butadiene rubber, montmorillonite, and EuDySrAlSiOx) within seconds by only employing H2O as the solvent. The intrinsic dynamics of the in situ polymerization and porosity creation of these SEs have been widely investigated. Notably, a flexible capacitive sensor made from as-fabricated silicone-based elastomers exhibits a wide pressure range, fast responses, long-term durability, extreme operating temperatures, and outstanding applicability in various media, and a wireless human-machine interaction system used for rescue activities in extreme conditions is established, which paves the way for more polymer-based material synthesis and wider applications. [ABSTRACT FROM AUTHOR]

Reinforcing fibers play a key role in improving the tribological properties of friction polymer composites. Cellulose reinforcing fibers were extracted from rapeseed straw waste and prepared as friction composites based on wet granulation, and the effects of heat and rapeseed straw fiber (RSF) additions on the tribological properties were systematically investigated. The addition of RSF induced an important transformation of the major wear mechanism to abrasive wear, especially at 9 wt%, where the abundant tribo-films contributed to the stability of the friction coefficients (fade rate 6.8%, recovery rate 106.6%), resulting in a 37.5% increase in wear resistance compared to no addition. Furthermore, XRD, FTIR and SEM analyses showed that the silane-ethanol solution modification contributed to the good performance of RSF. Highlights • Rapeseed straw fiber (RSF) and granulation technology for polymer composites. • Addition of RSF transforms adhesive and fatigue wear into abrasive wear. • Friction models are developed to clarify the wear mechanism transformation. • A 37.5% increase in wear resistance was achieved when RSF was added at 9 wt%. [ABSTRACT FROM AUTHOR]

The aim of this study is to investigate the effects of different cellulose nanofibers (CNF, 0–20% w/w) and aluminum oxide nanoparticles (Al2O3 NPs, 0–4% w/w) concentrations on the properties of deacetylated konjac glucomannan (DKGM) base film, as well as the protective performance of DKGM-based composite film on wood. The addition of CNF primarily improves the mechanical properties of the film. Compared to the KGM base film, the DKGM/CNF composite base film (DKC) exhibits excellent tensile strength and elongation at break, with increases of 44.39 MPa and 19.87%, respectively. After application to the wood surface, the glossiness of the wood increased by 43.48%, and the moisture absorption dimensional change rates reached 0.07% (radial) and 0.11% (tangential), while the moisture absorption coefficients decreased to 0.008 (radial) and 0.019 (tangential). The addition of Al2O3 NPs primarily improves the film's resistance to ultraviolet light and water. Compared to the DKGM base film, the water contact angle, water solubility, and water vapor barrier performance of the DKGM/ Al2O3 composite base film (DKA) significantly improved. When applied to the wood surface, the wood wear resistance and aging resistance increased by 62% and 69.67%, respectively. Therefore, DKGM base films doped with CNF and Al2O3 NPs have broad development prospects in the field of wood protection. [ABSTRACT FROM AUTHOR]

Shorter processes and lower temperatures are critical to reducing thermally modified wood costs. In this study, the exogenous H3PO4 was infiltrated into poplar (Populus × euramaricana) and then heated at low temperatures of 130–170 °C to speed up the thermal modification process of wood with better performance. The hygroscopicity was analyzed by dynamic vapor sorption detection and its constituents of modified wood were characterized by high-performance liquid chromatography and solid-state CP/MAS 13C NMR. The results showed that acid combined with low-temperature thermal modification (acid-LTM) resulted in lower equilibrium moisture content compared with the high-temperature thermal modification (HTM) wood. The addition of H3PO4 triggered severe degradation of the carbohydrates in the wood, and the mass loss of cellulose and hemicellulose were 11.9% and 24.1% when modified with 3.0% H3PO4 at 150 °C, respectively, thereby reducing the quantities of water sorption sites. Besides, the degradation products of carbohydrates crosslinked with the thermally stable lignin to form "pseudo-lignin" substances, leading to an increase in the lignin content of acid-LTM wood. The increase in the crystalline index and crystallite size of cellulose in acid-LTM wood was also conducive to reducing the wood hygroscopicity. The better hydrophobicity of acid-LTM poplar was further verified by its decrease in the water sorption site density and the theoretical OH content compared with HTM wood and unmodified wood. This study will offer a potential process to manufacture thermal-modified wood at a low cost. [ABSTRACT FROM AUTHOR]

Holocellulose fibers provide great potential to make paper with high performance. However, inappropriate reaction conditions may limit its improvement in paper performance due to the lack of sufficient research data. In this work, paper is prepared from the birch holocellulose fibers based on peracetic acid treatment and the papermaking process. The features of resulting holocellulose fibers are evaluated for different peracetic acid treatment conditions such as temperature and time. It reveals that high temperature and long treatment time lead to the degradation of hemicellulose/cellulose and the destruction of fibers, which further results in the poor mechanical performance of paper. By optimization for the treatment condition of holocellulose fibers, the corresponding paper exhibits the highest tensile strength (93 MPa), good bursting strength (601 kPa), and tearing strength (647 mN). The determination of optimum conditions will provide guidelines for the industrial production of holocellulose fibers and paper. [ABSTRACT FROM AUTHOR]

Using microcrystalline cellulose (MCC) with plastic behaviour and calcium phosphate anhydrous (CaHPO4) with brittle behaviour under compaction is very popular in the pharmaceutical industry for achieving desirable structural–mechanical properties of tablet formulations. Thus, mixtures of specific grades of MCC and CaHPO4 were tested in volume proportions of 100-0, 75-25, 50-50, 25-75, and 0-100 at a constant weight-by-weight concentration of sodium stearyl fumarate lubricant, utilizing a state-of-the-art benchtop compaction simulator (STYL'One Nano). Tablet formulations were prepared at 100, 150, 250, 350, 450, and 500 MPa, and characterized by tabletability profile, ejection force profile, proportion–tensile strength relationship, proportion–porosity relationship, pressure–displacement, and elastic recovery profiles, as well as by in-/out-of-die Heckel plots and yield pressures. Interestingly, the 25-75 formulation demonstrated a two-stage out-of-die Heckel plot and was additionally investigated with X-ray micro-computed tomography (µCT). By post-processing the µCT data, the degree of brittle CaHPO4 particles falling apart, along with the increasing compression pressure, was quantified by means of the surface area to volume (S/V) ratio. For the 25-75 formulation, the first stage (up to 150 MPa) and second stage (above the 150 MPa) of the out-of-die Heckel plot could be attributed to predominant MCC and CaHPO4 deformation, respectively. [ABSTRACT FROM AUTHOR]

Following a request from the European Commission, the EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety of microcrystalline cellulose and carboxymethyl cellulose as technological feed additives for all animal species. In its previous opinions on the safety and efficacy of the products, the FEEDAP Panel could not conclude on proper identification and characterisation as required for a feed additive. The occurrence of potential toxic impurities could also not be assessed. Based on the new data provided, the feed additives microcrystalline cellulose and carboxymethyl cellulose were properly identified and characterised and were shown to meet the specifications set for their use as food additives. Therefore, the conclusions of the safety reached in the previous opinions for microcrystalline cellulose and carboxymethyl cellulose meeting the food additive specifications apply to the microcrystalline cellulose and carboxymethyl cellulose under assessment as feed additives. The additives are considered safe for all animal species, the consumer and the environment. In the absence of data, the FEEDAP Panel is not in the position to conclude on the safety for the user. [ABSTRACT FROM AUTHOR]

The research on a novel preparation method for functional scaffolds from natural cellulose has attracted widespread attention in science and engineering. In order to obtain cellulose board which is similar to wood board in structure and mechanical properties, ice template, phase inversion under low temperature, and hot pressing were employed to fabricate board from natural cellulose. During preparation, ice template was used to control cellulose molecules arrange forming excellent orientation in the scaffold. Then, prepared scaffold was immersed in ethanol under −20 °C to remove salt ions used in cellulose resolve process, and keep the direction arrange of molecules in scaffold. Finally, prepared scaffold was treated by hot pressing for pushing off air in pores to form density board. Scanning electron microscopy image showed that prepared scaffold has directional cellulose arrange structure which was similar to that of wood. After hot pressing, the density of scaffold is increased. The mechanical properties of cellulose boards are enhanced with the increase of cellulose concentration, and the tensile strength can reach about 45 MPa, which has great potential in replacing natural wood boards. Our study provides new tactics for the use of natural cellulose in our life. [ABSTRACT FROM AUTHOR]

Cellulose modification often employs chemical processes to tailor its properties and functionalities to fit the demands of a wide range of applications, maximizing its potential as a versatile and sustainable material. From both synthetic and environmental standpoints, one of the ultimate goals is to achieve significant modifications to enhance the end properties of the cellulose while minimizing the number of modified building blocks. The current study demonstrates that a synthetic glucose derivative, 6‐deoxy‐6‐fluoro‐glucose (6F‐Glc), fed into the fertilized cotton ovules, resulted in the accumulation of fluorine inside the cotton fibers with no apparent alteration to their morphology or development. These fibers exhibited a degree of substitution of 0.006, which is 170 times lower than that reported for chemical methods for cellulose modification. However, the physical characterization of the modified fibers showed a surprisingly large impact of this low‐level modification on the cellulose structure (e.g., hydrogen bonding network rearrangement) and a modest increase in the mechanical properties of the fibers. The obtained results exemplify the use of biological systems to introduce low quantities of new functionalities while maximizing the impact on fiber properties. [ABSTRACT FROM AUTHOR]

One of the biggest challenges facing a designer of paper structures is its low resistance to moisture and water. Paper is a hydrophilic material that absorbs moisture from the outside. This causes the hydrogen bonds between the cellulose molecules to loosen and as a result a rapid decrease in strength parameters. In order to be able to use paper as a construction material, there is a need to select and evaluate the effectiveness of the appropriate impregnant, as well as to know its impact on the mechanical properties of the impregnated paper. The paper analyzes the effect of the use of various impregnations, including wood oil, yacht lacquer, and fire-retardant agent impregnation, on the tensile strength of several types of cellulose-derived materials, e.g. corrugated board, solid board, paper cores, and honeycomb board. The effectiveness of the impregnation was also assessed using the method of measuring the contact angle of the reference and impregnated surfaces. [ABSTRACT FROM AUTHOR]

Natural fibers extracted from plants are preferred as an alternative to synthetic products. The main reasons for this preference are their affordable cost, light weight and good mechanical properties. However, finding new natural raw materials is challenging due to growth limitations in different geographical areas. Platanus orientalis L. (Eastern plane tree) is a tree with abundant fruits that can grow in many regions of the world. The aim of this study was to determine the mechanical (tensile strength, tensile modulus, elongation), physical (density, fiber diameter) and chemical (cellulose, hemicellulose and lignin) properties of Platanus orientalis L. fruit's stem by fiber extraction from the stems of the tree. It was determined that the extracted fiber had good mechanical properties and cellulose content of 42.03%. As a result of thermogravimetric analysis, it was determined that the plane tree fruit's stem fiber had thermal resistance of up to 299 °C. The tensile strength value was 157.76 MPa, the tensile modulus value was 1.39 GPa and the elongation value was 22.01%. It was determined that it is suitable for use in fiber reinforcement in thermoplastic-based composites at temperatures below 299 °C. According to the results obtained by the mechanical, chemical and physical analysis of Platanus orientalis L. fruit's stem fiber (PoLfs), it could be recommended as a suitable alternative as a reinforcing fiber in thermoplastic and thermoset composites. [ABSTRACT FROM AUTHOR]

In recent decades, interest in oxide nanomaterials with multifunctional properties has grown significantly. Titanium dioxide undoubtedly belongs to them, characterized by exceptional photocatalytic activity, non-toxicity, high availability, biocompatibility, antibacterial properties, and low cost. The treatment of textile materials with TiO2 nanoparticles is relatively simple, but the insufficient bonding efficiency between certain fibers and TiO2 nanoparticles creates a problem regarding the stability and durability of the nanocomposites. In this study, an attempt was made to improve the properties of cotton modified with gelatin hydrogel, which was cross-linked by glutaraldehyde, and incorporated titanium nanoparticles. Three modification methods were applied, varying the mixing regimes of the components and the conditions. The composite materials were investigated via SEM, FTIR, UV-Vis and elemental analysis. For the first time, titanium nanoparticles obtained by the reduction of TiO2 with oxalic acid were used to modify cotton. Cotton samples were modified with gelatin hydrogel cross-linked with glutaraldehyde to increase the active groups of cellulose fibers that bind to Ti ions. Using the hydrogel, the nanoparticles are deposited on the surface of the textile substrate. The elemental analysis shows the presence of TiO2 nanoparticles. Lines for Ti atoms appear, which is evidence that the particles retain their composition after immobilization. Microscopic analyzes showed that TiO2 nanoparticles were distributed unevenly in the cotton matrix. In the UV analysis, the appearance of a new absorption at 890 cm-1 was observed due to the attachment of Ti-NPs. The appearance of the IR peak at 878 cm-1 confirms the formation of chelate complexes of the nanoparticles in the composite material. [ABSTRACT FROM AUTHOR]

Recycled paper has become increasingly used as a raw material in the paper industry. However, hornification limits its application. Herein, the effect of recycling on the mechanical properties and microstructure of khasi pine pulp was systematically studied. The mechanical properties deteriorated and water retention value decreased after recycling. X-ray diffraction and Fourier-transform infrared spectroscopy revealed that cellulose crystallinity increased and partial cocrystallization occurred on cellulose microfibrils. Through the analysis of the morphology of secondary fibers by FQA, the loss of fine fibers caused by each reuse was found. Using the filtration method to prepare the recycled paper reduced the loss of fine fibers and improved the mechanical properties, with the tensile strength of a sample prepared using a sand core filter unit for five cycles (8.37 MPa) being like that of a sample prepared using a paper machine after one cycle. The investigation of the internal structure of the paper showed that the retained fine fibers were bonded between the long fibers, promoting the bonding between the fibers. Fine fibers improve the curling and twisting of fibers to some extent, especially in the first three recycling cycles. The hornification phenomenon of recycled paper was studied from the viewpoint of the fiber components, which is important to promote the development and application prospect of recycled paper. [ABSTRACT FROM AUTHOR]

Jabon (Anthocephalus cadamba) is a promising plant species with straight, visually pleasing trunks that can be harvested at a young age as a resource for pulp and paper production due to the rapid growth rate possessed. Therefore, this study aims to investigate the chemical composition and fiber biometry of 3, 6, and 9-year-old Jabon wood, determining their suitability as a pulp and paper raw material. Samples were collected from both stem and branch sections and analyzed according to the Tappi standard. Fiber cell maceration was conducted to enable the precise measurement of fiber dimensions and derivatives. The results showed high cellulose, holocellulose, and lignin content in Jabon wood, with low to moderate levels of extractives and ash. Additionally, the crystallinity index (CrI) increased with age, particularly from 3 to 9 years old. The branch of the plant, with Grade II fiber derivative quality, had lower CrI compared to the stem, while the inner stem showed a lesser value than the outer part. In conclusion, 3-year-old Jabon wood is a potential raw material for pulp and paper production. [ABSTRACT FROM AUTHOR]

Water plays an important role in the properties of cellulose. In materials design, the water uptake of cellulose has been traditionally seen as a drawback, since water reduces mechanical resistance of paper and cardboard, and at high hydration, cellulose-based products are disintegrated. However, recently, the hydration of cellulose has been considered as an advantage to design water-responsive soft actuators. In Nature, water is the fuel for several plant functions that involve motion, such as the seed release or the plant protection from high temperature and radiation. Inspired by these natural systems, cellulose-based actuators have been designed to display different movements (bending, twisting, curling) in response to water. Biopolymer structuration inducing anisotropy within the system allows the asymmetric expansion of layers, which results in macroscopic movement. This review gives an overview of the soft actuators triggered by the hydration/dehydration processes of cellulose. We present representative examples of water-triggered natural actuators, which have inspired researchers to design anisotropic cellulose-based materials that develop controlled movement in response to water. [ABSTRACT FROM AUTHOR]

Due to the increasing demands of consumers from the food packaging, it enabled the improve of active packaging practices. Antimicrobial and antifungal coatings or films are an active packaging application. In such packaging materials, natural or synthetic antimicrobial material is added to the film or coating to help the packaging protect food. The use of biofilms produced from biopolymers in food packaging is more suitable than polymers with many damages such as PET, PE. Film production of many biopolymers such as cellulose derivatives, chitosan, PVA, starch PLA can be realized. Pelargonium graveolens plant is a natural source with strong antifungal and antimicrobial properties. For the reasons explained above, the experimental study aims to manufacture printable film with antimicrobial properties which is used in active packaging, using cellulose butyrate acetate and Pelargonium graveolens essential oil. For this purpose, cellulose butyrate acetate bio films, having variative ratios (0.1, 2.5, 5, 10 %) of Pelargonium graveolens oil, were produced with spin coating method. The transparency of prepared five different films were defined by UV–vis. spectroscopy. The antimicrobial properties of the produced films were measured against gram positive and negative bacteria. All produced biofilms were printed. The printability parameters of biofilms, (color, gloss) were determined. Consequently, cellulose butyrate acetate films loaded with Pelargonium graveolens oil were successfully produced. It is concluded that obtained all biofilms are with no color, transparent and printable with oil based inks. It was determined that the quantity Pelargonium graveolens oil raised in the biofilms had a strong inhibitory effect against gram positive and negative bacteria. With these features; produced films are considered to be suitable for active packaging applications. [ABSTRACT FROM AUTHOR]

In this paper, using Styphnolobium japonicum, Cryptomeria fortunei and Pinus yunnanensis as raw materials, cellulose (CE) was first extracted by chemical method (CM1) and biological enzymatic method 2 (BM2), and then further prepared into nanocellulose fiber (CNF) by biological enzymatic method 1(CPM (CPM stands for cellulase and pectinase)). The CE and CNF were characterized by FTIR, XRD, SEM, DSC and TG. The results showed that the CNF prepared by CM1-CPM was cellulose type II, CNF prepared by BM2-CPM was cellulose type I. The best crystallinity of the CNF prepared by CM1-CPM reached 74.1% (C. fortunei CNF), the best yield was 24.0% (S. japonicum CNF) and the minimum average diameter was 62.6 nm (C. fortunei CNF). However, the best crystallinity of CNF prepared by BM2-CPM reached 80.1% (C. fortunei CNF), the best yield was 27.4% (C. fortunei CNF), and the minimum average diameter was 31.6 nm (C. fortunei CNF). And also, the thermal degradation analysis of the CNF prepared from the three raw materials revealed that the CNF prepared by BM2-CPM had better thermal degradability. Finally, the thermal stability analysis of the C. fortunei CNF was carried out, and it was found that the residual mass of CNF prepared by BM2-CPM was 48%, while the residual mass of C. fortunei CNF prepared by BM1-CPM was 22%, which showed the C. fortunei CNF prepared by BM2-CPM had better thermal stability. Therefore, the properties of nanocellulose prepared by BM2-CPM are optimal. [ABSTRACT FROM AUTHOR]